小乖的圖學筆記 week08

 1.考期中考(只有80QAQ)

2.複習week07教了些啥子

3.把week-7教的先做一遍(安裝設定啥鬼的)

4.

------------------------------------------------------------------------------------------

練習貼兩張圖

1.開啟GLUT專案

2.將程式碼貼上

#include <opencv/highgui.h> ///使用 OpenCV 2.1 比較簡單, 只要用 High GUI 即可
#include <opencv/cv.h>
#include <GL/glut.h>
GLuint id1, id2; ///TODO:增加2個 貼圖ID
int myTexture(char * filename)
{
    IplImage * img = cvLoadImage(filename); ///OpenCV讀圖
    cvCvtColor(img,img, CV_BGR2RGB); ///OpenCV轉色彩 (需要cv.h)
    glEnable(GL_TEXTURE_2D); ///1. 開啟貼圖功能
    GLuint id; ///準備一個 unsigned int 整數, 叫 貼圖ID
    glGenTextures(1, &id); /// 產生Generate 貼圖ID
    glBindTexture(GL_TEXTURE_2D, id); ///綁定bind 貼圖ID
    glTexParameteri(GL_TEXTURE_2D, GL_TEXTURE_WRAP_S, GL_REPEAT); /// 貼圖參數, 超過包裝的範圖T, 就重覆貼圖
    glTexParameteri(GL_TEXTURE_2D, GL_TEXTURE_WRAP_T, GL_REPEAT); /// 貼圖參數, 超過包裝的範圖S, 就重覆貼圖
    glTexParameteri(GL_TEXTURE_2D, GL_TEXTURE_MAG_FILTER, GL_NEAREST); /// 貼圖參數, 放大時的內插, 用最近點
    glTexParameteri(GL_TEXTURE_2D, GL_TEXTURE_MIN_FILTER, GL_NEAREST); /// 貼圖參數, 縮小時的內插, 用最近點
    glTexImage2D(GL_TEXTURE_2D, 0, GL_RGB, img->width, img->height, 0, GL_RGB, GL_UNSIGNED_BYTE, img->imageData);
    return id;
}
void display()
{
    glClear(GL_COLOR_BUFFER_BIT | GL_DEPTH_BUFFER_BIT);
    glBindTexture(GL_TEXTURE_2D, id2);
    glutSolidTeapot(0.3);
    glBindTexture(GL_TEXTURE_2D, id1);
    glBegin(GL_POLYGON);
        glTexCoord2f( 0, 0 ); glVertex2f( -1, 1 );
        glTexCoord2f( 0, 1 ); glVertex2f( -1, -1 );
        glTexCoord2f( 1, 1 ); glVertex2f( +1, -1 );
        glTexCoord2f( 1, 0 ); glVertex2f( +1, 1 );
    glEnd();
    glutSwapBuffers();
}
int main(int argc, char** argv)
{
    glutInit( &argc, argv );
    glutInitDisplayMode( GLUT_DOUBLE | GLUT_DEPTH );
    glutCreateWindow(" Week08 ");
    glutDisplayFunc(display);
    id1 = myTexture("puipui.jpg");
    id2 = myTexture("bg.jpg");
    glEnable(GL_DEPTH_TEST);
    glutMainLoop();
}

3.成果展示

------------------------------------------------------------------------------------------

練習打光

1.(接續上面的程式碼)把下面這段貼到main()上

const GLfloat light_ambient[]  = { 0.0f, 0.0f, 0.0f, 1.0f };
const GLfloat light_diffuse[]  = { 1.0f, 1.0f, 1.0f, 1.0f };
const GLfloat light_specular[] = { 1.0f, 1.0f, 1.0f, 1.0f };
const GLfloat light_position[] = { 2.0f, 5.0f, -5.0f, 0.0f };
const GLfloat mat_ambient[]    = { 0.7f, 0.7f, 0.7f, 1.0f };
const GLfloat mat_diffuse[]    = { 0.8f, 0.8f, 0.8f, 1.0f };
const GLfloat mat_specular[]   = { 1.0f, 1.0f, 1.0f, 1.0f };
const GLfloat high_shininess[] = { 100.0f };

2.把下面這段貼到main()裡面Loop上

    glEnable(GL_LIGHT0);
    glEnable(GL_NORMALIZE);
    glEnable(GL_COLOR_MATERIAL);
    glEnable(GL_LIGHTING);
    glLightfv(GL_LIGHT0, GL_AMBIENT,  light_ambient);
    glLightfv(GL_LIGHT0, GL_DIFFUSE,  light_diffuse);
    glLightfv(GL_LIGHT0, GL_SPECULAR, light_specular);
    glLightfv(GL_LIGHT0, GL_POSITION, light_position);
    glMaterialfv(GL_FRONT, GL_AMBIENT,   mat_ambient);
    glMaterialfv(GL_FRONT, GL_DIFFUSE,   mat_diffuse);
    glMaterialfv(GL_FRONT, GL_SPECULAR,  mat_specular);
    glMaterialfv(GL_FRONT, GL_SHININESS, high_shininess);

3.成果展示

------------------------------------------------------------------------------------------

玩打光小程式

1.如圖所示